Basic Instrument Functions
R&S
®
CMW500
83User Manual 1173.9463.02 ─ 02
5 Basic Instrument Functions
The following sections describe dialogs and settings for general use. The dialogs are not
related to a particular general purpose or network test application.
5.1 Startup Dialog
The "Startup" dialog shows the progress of the startup procedure and the available
options. Once the startup procedure has been terminated, it is automatically replaced by
the dialog opened in the last session.
Fig. 5-1: Startup dialog
The "Startup" dialog provides control softkeys that you can activate while the startup is
in progress.
Firmware Update
Copies new firmware-specific data to the internal hardware of the R&S CMW500. This is
required for example after a board change.
Startup Dialog
To Next Page
Loading...
