Basic Instrument Functions
R&S
®
CMW500
110User Manual 1173.9463.02 ─ 02
Fig. 5-16: Setup - Misc - Logging
Enable
Enables or disables the general support of message monitoring. If disabled, no signaling
application can use this feature. If enabled, signaling applications supporting this feature
can use it.
Host Address
Configures the IP address to which the messages shall be sent for logging.
The address space is limited. Parts of the address are fixed. Other parts support only a
limited range. Assign a compatible address to the host.
5.3.9 Digital IQ
The "Digital IQ" section is only present if the R&S CMW500 is equipped with an I/Q board
(option R&S CMW-B510A/B).
To open the dialog press SETUP and select "Measurement > Digital IQ".
Fig. 5-17: Setup - Digital IQ
Setup Dialog
To Next Page
Loading...
