Basic Instrument Functions
R&S
®
CMW500
89User Manual 1173.9463.02 ─ 02
The R&S CMW500 supports the following bitmap data formats for print files:
●
.bmp, .emf, .jpeg, .pbm, .pgm, .png, .ppm, .wmf, .xbm, .xpm
The default file format (for file names entered without extension) is .jpeg.
5.2.4 Info Dialog
The "Info" dialog is subdivided into the following sections:
●
Current state – displays information about the current state of installed firmware
applications
●
Messaging – for future extensions
●
Problem Reporting – allows to prepare collected logging information for problem
reporting to Rohde & Schwarz
SCPI commands: no remote commands are available for this dialog
● Current State View..................................................................................................89
● Problem Reporting..................................................................................................91
5.2.4.1 Current State View
The "Current State" view provides information concerning the current state of all installed
firmware applications. Additionally it displays the software version at the top, the most
important address settings for remote control at the bottom left and information concern-
ing the last calibration of the instrument at the bottom right.
To open the dialog press INFO.
Utility Dialogs
To Next Page
Loading...
