Preparing for Use
R&S
®
CMW500
39User Manual 1173.9463.02 ─ 02
Test 2:
●
Adjustment and verification with the new software.
●
Downgrade to the latest official software and verification.
The tests are passed if all verification results show comparable values.
Rohde & Schwarz is certified according to ISO 9001 since May 1995.
2.9.4 R&S Software Distributor
The "R&S Software Distributor" is a software utility that is opened when a R&S CMW500
setup file is started.
Fig. 2-2: R&S Software Distributor
The software distributor can initiate a local or a remote installation.
1. Select "Local Installation" if you start your setup file from the R&S CMW500 hard disk
or an external storage medium (USB memory stick, CD-ROM with external drive)
connected to the instrument.
2. Select "Remote Installation" if your setup files are on an external host computer that
is connected to your R&S CMW500.
Note that a remote installation also allows you to update several instruments simul-
taneously.
If you want to install packages contained in several setup files, proceed as follows:
1. Store all setup files in the same directory.
Software Update
To Next Page
Loading...
