Rohde & Schwarz CMW500 1201.0002K50 - Measurement Contexts and Views

Remote Control
R&S
®
CMW500
136User Manual 1173.9463.02 ─ 02
See also Sub-Instruments.
The following table provides examples of FWAs of the R&S CMW500 and their mne-
monics:
Firmware Application Description
BLUetooth:MEASurement<i> Bluetooth network standard, measurements
CDMA:GENerator<i> CDMA2000 network standard, generator
CDMA:MEASurement<i> CDMA2000 network standard, measurements
CDMA:SIGNaling<i> CDMA2000 network standard, signaling
DATA:MEASurement<i> Data application unit, measurements
FMSTereo:MEASurement<i> FM-modulated RF signals, measurements
EVDO:MEASurement<i> 1xEV-DO network standard, measurements
EVDO:SIGNaling<i> 1xEV-DO network standard, signaling
GPRF:GENerator<i> RF general purpose application, generator
GPRF:MEASurement<i> RF general purpose application, measurements
GSM:GENerator<i> GSM network standard, generator
GSM:MEASurement<i> GSM network standard, measurements
GSM:SIGNaling<i> GSM network standard, signaling
LTE:MEASurement<i> LTE network standard, measurements
LTE:SIGNaling<i> LTE network standard, signaling
TDSCdma:MEASurement<i> TD-SCDMA network standard, measurements
WCDMa:GENerator<i> WCDMA network standard, generator
WCDMa:MEASurement<i> WCDMA network standard, measurements
WCDMa:SIGNaling<i> WCDMA network standard, signaling
WIMax:MEASurement<i> WiMAX network standard, measurements
WIMax:SIGNaling<i> WiMAX network standard, signaling
WLAN:MEASurement<i> WLAN network standard, measurements
6.3.3 Measurement Contexts and Views
Most measurement Firmware Applications are further subdivided into different measure-
ment contexts. In manual control, a measurement context may consist of several views,
providing different types of measurement results. In remote control, measurement con-
texts and views are identified by the fourth- and fifth/sixth-level mnemonics in the com-
mand headers, respectively.
Measurement contexts and views are addressed by different types of commands:
●
Measurement control commands affect the entire measurement context. The same
holds for most measurement configurations.
R&S CMW Software and Command Structure