R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
449
Data formats for output files which can be integrated in corresponding programs for
documentation purposes at a later time. WMF can only be used for output to a file
and EWMF also for the output to the clipboard.
BMP, JPG,
PNG
Windows Bitmap:
Data format for output to files only.
*RST value -
SCPI,
Command
Types
Confirmed, command or query.
Example:
HCOP:DEV:LANG BMP
Select Windows bitmap format for printer files.
MMEM:NAME 'C:\Screenshots\PLOT1.BMP'
Define a printer file name and specify an existing directory
(without creating the file).
HCOP:DEST 'MMEM'; HCOP
Select 'Print to file' and create the printer file specified before.
HCOPy:ITEM:ALL
Selects the complete screen to be output. The hardcopy output is always provided with comments, title,
time and date. As an alternative to the whole screen, e.g. only traces
(HCOPy:ITEM:WINDow:TRACe:STATe command) can be output.
*RST value After a reset, the complete information is printed.
SCPI, Command Types
Confirmed, no query.
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP
Start printing.
HCOPy:ITEM:LOGO[:STATe] <Boolean>
Qualifies whether or not the printed output contains the logo. The default R&S logo (file Logo.gif) is stored
in the Resources\Images subdirectory of the NWA program directory and can be replaced by another
logo.
<Boolean>
ON | OFF - Logo is included or excluded.
*RST value OFF
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:ALL
To Next Page
Loading...
