R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
450
Select the complete information to be printed.
HCOP:ITEM:LOGO ON; HCOP
Include the logo in the printed output and start
printing.
HCOPy:ITEM:WINDow<numeric_suffix>:TEXT <string>
Defines the comment text for the printout.
<numeric_suffix>
The numeric suffixes <1|2> are irrelevant for this command.
<string>
Text with a maximum of 100 characters; line feed by means of character
@.
*RST value -
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:WIND:TEXT 'comment'
HCOPy:ITEM:WINDow<numeric_suffix>:TRACe:STATe <Boolean>
Selects the output of the currently displayed trace.
Both the HCOPy:ITEM:WINDow:TRACe:STATe command and the HCOPy:ITEM:ALL command enable
the output of the whole screen.
<numeric_suffix>
The numeric suffixes <1|2> are irrelevant for this command.
<Boolean>
ON | OFF - Selects or deselects the output of the currently displayed
trace.
*RST value OFF
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:WIND:TRACe:STAT ON
HCOPy:PAGE:ORIentation<device> PORTrait | LANDscape
Defines the orientation of the printed page. Switching between LANDscape and PORTrait rotates the
hardcopy result by 90 degrees. No other settings are changed.
The command is only available provided that the output medium "printer" (HCOPy:DESTination) has
been selected.
<device>
1 | 2 - Hardcopy device 1 or 2.
PORTrait
Short edge of the paper is the top of the page.
LANDscape
Long edge of the paper is the top of the page.
*RST value PORTrait
SCPI, Command Types
Confirmed, command or query
To Next Page
Loading...
