Installing the dedicated app and driver
17
Installing the BRIDGE CAST app
1.
Right-click on the compressed file that was downloaded, and select “Extract All”.
2.
Open the decompressed folder and double-click on the “Roland_BRIDGE_CAST_Installer.exe” installer.
3.
Follow the onscreen instructions to install the BRIDGE CAST app.
If you see a User Account Control confirmation message, click “Yes”.
à Mac users
Downloading and installing the dedicated app and driver
1.
Launch your browser and access the following Web page.
https://roland.cm/bridgecastx
2.
From the downloads page, search for “BRIDGE CAST X Driver Ver.xxx for macOS” and click on the link.
“xxx” indicates the version number.
3.
Follow the onscreen instructions to download the dedicated driver.
4.
Double-click the compressed file to decompress the dedicated driver you downloaded.
5.
Open the decompressed folder and double-click on the “BRIDGECAST_USBDriver.pkg” file.
6.
Follow the onscreen instructions to install the dedicated driver.
7.
Set either the USB I or USB II connection setting switch to “PC”, to match the USB port to which you’ve
connected your computer.
8.
Use a USB cable to connect the USB port that’s set to “PC” to your computer, and then turn on this unit.
* You don’t need to install separate drivers for the devices connected to USB I and II.
Downloading the BRIDGE CAST app
1.
Launch your browser and access the following Web page.
https://roland.cm/bridgecastx
2.
From the downloads page, search for “BRIDGE CAST APP Ver.xxx for macOS” and click on the link.
“xxx” indicates the version number.
3.
Follow the onscreen instructions to download the BRIDGE CAST app.
Installing the BRIDGE CAST app
1.
Double-click the compressed file for the BRIDGE CAST app you downloaded to decompress it.
2.
Double-click the “Roland_BRIDGE_CAST.dmg” file.
3.
Follow the onscreen instructions to install the BRIDGE CAST app.
To Next Page
Loading...
Need help?
General
