Roland BRIDGE CAST X User Manual

Connecting to your computer or external equipment and configuring the settings
18
Connecting to your computer or external
equipment and configuring the settings
This section explains how to connect this unit to your computer or external equipment (such as a mic, monitor speakers or tablet)
and how to configure your computer’s device settings.
â Connecting to a computer/external equipment(P.18)
â Configuring the device settings on your computer(P.20)
Connecting to a computer/external equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any
connections.
* Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear
some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.
1. Connect your mic, monitor speakers, headphones, mobile device or other external equipment to this
unit.
2. Connect your computer to the USB I or USB II port.
To import the video output signal from the BRIDGE CAST X into your computer, connect to the USB II port.
3. Set the USB I or USB II connection settings switch to “PC”, according to the USB port you’re using.
3. Turn on your computer or video game console, and then turn on this unit.
4. Turn on your external equipment.
5. Launch the BRIDGE CAST app.
6. Adjust the volume to ensure a listenable volume balance while playing the game audio from your computer,
video game console,
voice chat or mic.

Roland BRIDGE CAST X Specifications

General

Brand	Roland
Model	BRIDGE CAST X
Category	DJ Equipment
Language	English