Adjusting the Mic Audio
34
Adjusting the Mic Audio
This section explains how to adjust the mic audio.
â Getting ready to use a mic(P.34)
â Calibrating the mic sound quality (Cleanup)(P.36)
â Processing the Mic Audio (Mic Effects)(P.38)
â Saving the Mic Effect Settings as a Preset(P.40)
â Exporting a mic effect preset file(P.43)
Getting ready to use a mic
Here’s how to set the type of mic used and the mic input gain (sensitivity).
â Selecting the type of mic
â Adjusting the input gain (sensitivity)
Selecting the type of mic
1.
On the menu screen, click the “MIC SETUP” tab and set the “MIC TYPE”.
Select a mic type according to the mic you’re using.
Dynamic mic, condenser mic
* When a condenser mic is connected, set the rear panel phantom power switch to “48 V”.
Doing so supplies phantom power, and [48V] is shown in blue onscreen.
* When connecting a dynamic mic or a condenser mic that operates on battery power, make
sure to set the phantom power switch to “OFF”. These types of mics may malfunction when
supplied with phantom power.
To Next Page
Loading...
Need help?
General
