CONTROL PAD settings
59
Assigning hot keys
By setting the function of a pad to “HOTKEY”, you can press the pad just once to execute an action easily, instead of using
keyboard shortcuts (a combination of key presses).
1.
Set COMMAND to “HOTKEY”.
“Click to Assign” is shown for OPTION 1.
2.
Click “Click to Assign” for OPTION 1.
3.
When “Scanning KEY Stroke...” is shown, use the keyboard to input a shortcut key.
To use other modifier keys such as Shift, Control, Alt or the Windows key in combination, hold down the desired modified
key and press the desired keystroke.
The key is registered when you press any other key besides a modifier key.
The modifier keys for a Mac are Shift, Command and Option.
4.
Check whether the key combination you inputted (such as Shift + A) is shown for OPTION 1.
5.
To set a different hot key, click the OPTION 1 input box again.
Once “Scanning KEY Stroke...” is shown, you can input the key combination.
To Next Page
Loading...
Need help?
General
