Roland BRIDGE CAST X User Manual

Output settings
70
Output settings
This section explains about the audio output settings.
â Editing the output audio settings(P.70)
Editing the output audio settings
This shows you how to set the delay time for the output audio and modify the audio that’s output from the LINE OUT jack and USB
port.
1. On the menu screen, click the “OUTPUT” tab and set the parameters in the respective menus.
Menu
Value
Explanation
DELAY
Off, On
Turns the delay on/off. When this is “On”, the audio output is delayed by the
specified time.
* Delay is applied to the STREAM MIX bus audio that’s output from the USB
port.
Correcting timing discrepancies between video and audio
When streaming games on your computer, you might notice that what you see
on the game screen is not in sync with the game sound (the audio signal that’s
input from the BRIDGE CAST X to your computer). By applying delay to the
audio output, you can make the timing of the video and audio match.
0.0–1000.0 ms
Adjusts the delay time (audio latency).
LINE OUT MODE
This selects the audio to be output from the LINE OUT jack.
MIC
Mic audio (not routed through a bus)
STREAM MIX
STREAM MIX bus audio
PHONES SYNC
Same audio as the headphones output
USB OUT MODE
(MOBILE/CONSOLE)
When the connection setting for the USB I port is “MOBILE/CONSOLE” or the connection setting for
the USB II port is “MOBILE”, this sets the audio that’s output from the USB port or ports.
MIC
Mic audio (not routed through a bus)
STREAM MIX
STREAM MIX bus audio

Roland BRIDGE CAST X Specifications

General

Brand	Roland
Model	BRIDGE CAST X
Category	DJ Equipment
Language	English