60
Using Scene Chain
Use the SCENE CHAIN function when you want to recall scenes
in the order of the songs that you’ll be playing live.
A scene chain lets you specify the desired order of the scenes
that you’ll be using, without changing the numbers of the
scenes themselves. The order of scenes can be saved as a chain
set, and by switching the chain set you can change the order of
the scenes.
1.
Press the [SCENE CHAIN] button.
The SCENE CHAIN screen appears.
Name of the selected scene
Memo of the selected scene
2.
Touch the “CHAIN SET” name.
3.
Switch chain sets.
Menu Explanation
[E4] knob Scrolls up/down to select a chain set.
[E5] CANCEL Cancels.
[E6] OK Selects a chain set.
Parameter Value Explanation
CHAIN SET 001–100 Chain set number.
4.
Press a tone category button [1]–[16] to select
a scene.
The 16 scenes arranged horizontally in the screen correspond to
tone category buttons [1]–[16] respectively.
5 You can also select a scene by directly touching a scene icon in the
screen.
5 You can also use the [INC] [DEC] buttons, [K] [J] buttons, [VALUE] dial,
and a footswitch (p. 10) to select scenes.
5 The icon of the selected scene is highlighted.
5 Up to 512 scenes (16 x 32 pages) can be registered in a chain set. If
more than 16 scenes are registered, a KJ symbol is shown at each end
of the scene icon in the screen. Touch the J (K) symbol to switch to the
next (previous) page.
Page number
Recalling Scenes in the Order of Songs
(Scene Chain)
To Next Page
Loading...
Need help?
General
