EasyManua.ls Logo

Roland MC-808 - Editing Songs (Song Edit)

Roland MC-808
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
108
Editing songs (Song Edit)
“Song editing” is the process of editing individual steps of performance data for a song.
* You must stop the song playback before you can edit the song.
This operation copies song data to a different song.
1.
Press [SONG] to enter Song mode.
2.
Select the copy-source song (p. 106).
3.
Hold down [SHIFT] and press keyboard pad [1].
4.
Select the copy-destination song.
fig.05-010
5.
Press [ENTER].
The song will be copied.
* To cancel, press [EXIT].
If the copy destination contains data, that data will be erased
when you execute this copy operation.
6.
If you want to save the song, press [WRITE].
If you don’t save the song, the settings will revert to their prior
state when you turn off the power.
“Saving a song”
(p. 110)
This operation deletes an unwanted step from the song, and joins the
two sections.
fig.1-54
1.
Press [SONG] to enter Song mode.
2.
Select the song that you want to edit (p. 106).
3.
Hold down [SHIFT] and press keyboard pad [3].
4.
Select the step that you want to delete.
fig.05-011
5.
Press [ENTER].
You’ll be asked to confirm your choice.
6.
Press [ENTER] once again.
The selected step will be deleted.
* To cancel, press [EXIT].
7.
If you want to save the song, press [WRITE].
If you don’t save the song, the settings will revert to their prior
state when you turn off the power.
“Saving a song”
(p. 110)
This operation inserts a step into the song, and moves subsequent
steps backward by one.
fig.1-56
1.
Press [SONG] to enter Song mode.
2.
Select the song that you want to edit (p. 106).
3.
Hold down [SHIFT] and press keyboard pad [4].
4.
Select the step at which you want to insert a pattern.
fig.05-012
* In the example shown above, select step 2.
5.
Press [ENTER].
A step containing the same pattern as the step you selected in
step 1 will be inserted, and the subsequent steps will be moved
backward by one.
* To cancel, press [EXIT].
6.
If you want to save the song, press [WRITE].
If you don’t save the song, the settings will revert to their prior
state when you turn off the power.
“Saving a song”
(p. 110)
Copying a song (COPY)
Deleting a step (DELETE STEP)
123456
12345
Inserting a step (INSERT STEP)
1 2
2
3456
12
2
345
MC-808_r_e.book 108 ページ 2007年7月17日 火曜日 午後5時1分

Table of Contents

Other manuals for Roland MC-808

Related product manuals