78
Editing patterns (Pattern Edit)
This operation initializes the performance data of the pattern to an
empty state (blank pattern).
All the data of that pattern will be lost when you execute the
initialize operation. Please be aware that you can’t use Undo to
recover from this operation.
1.
Select the pattern you want to initialize.
2.
Hold down [SHIFT] and press keyboard pad [16].
You’ll be asked to confirm your choice.
fig.03-125
3.
Press [ENTER] to execute.
* To cancel, press [EXIT].
Initializing a pattern (INITIALIZE)
MC-808_r_e.book 78 ページ ２００７年７月１７日 火曜日 午後５時１分
To Next Page
Loading...
