Roland R-26 - Simultaneous Recording on the R-26 Itself; Using Direct Monitor

Connecting to Your Computer via USB
90
Simultaneous Recording
on the R-26 Itself
The audio being input to the R-26 can
also be recorded on the R-26 itself while
simultaneously recording into software on
your computer.
1. Chose [MENU]Ú<REC SETUP>Ú<REC
SOURCE> (p. 31).
2. Choose <TO PC>.
Setting Description
TO PC
Signal from the R-26 being input
to the computer
FROM PC
Signal from the computer being
input to the R-26
Using Direct Monitor
If the Direct Monitor function is turned
on, the sound being input to the R-26 can
be monitored through headphones or
speakers.
1. Touch the <AUDIO IF> tab.
2. Touch <DIRECT MONITOR> to turn it
on/o.