Recording
43
Overview Getting Ready Recording Playback File Operation Computer Appendix
4. Touch <OK>.
5. Touch <BACK> to return to the main
screen (p. 16).
Adjusting the mix balance in
manual mode
Here’s how to manually adjust the
balance between the directional mics and
omnidirectional mics. The balance can be
adjusted over ve steps.
1. Select manual in step 3 (p. 42).
2. Touch <SETUP>.
3. Use to adjust the balance.
4. Touch <OK> to conrm the setting.
5. Touch <OK> to exit from the MIC
MODE SETUP.
6. Touch <BACK> return to the main
screen (p. 16).
Setting the Input
Sensitivity and Input Level
Here’s how to adjust the sensitivity and
input level of the recording source.
Adjusting the input sensitivity
1. From the main screen, press the
panel’s [SENS] button.
2. In the display, touch the <SENS>
slider.
If you’re adjusting multiple recording
sources when using 4 channels or 6
channels, touch the tab for the recording
source that you want to adjust, and then
touch the <SENS> slider.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
