Recording
50
Splitting the Project
During Recording
You can split the project during recording.
If you’ve split the project, it will be easy to
start playback from a division point.
When you’re making a continuous
recording for an extended period of
time, you may nd it desirable to split the
project at points that will be convenient for
searching.
Splitting manually
1. Start recording.
2. Touch the MARK tab (p. 17).
3. At the moment you want to assign a
marker, touch <SPLIT>.
Specifying the Project Size
for Automatic Splitting
The R-26 will automatically split the
project being recorded when it reaches a
specied size. By default, the project will
be automatically split when the le size
reaches 2 GB.
1. Choose [MENU] Ú <REC SETUP> Ú
<MAX FILE SIZE>.
“MAX FILE SIZE” is located on page 3/3.
Touch
to access 3/3.
2. Select the le size for automatically
splitting.
Setting Description
64 MB
Size at which project will
be automatically split
128 MB
256 MB
512 MB
1 GB
2 GB
* The maximum size of le that the R-26
can handle is 2 GB.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
