Roland R-26 - Main Screen Tabs

Overview of the R-26
17
Overview Getting Ready Recording Playback File Operation Computer Appendix
Tabs in the main screen
By touching a tab at the bottom of the
Playing/Stopped or Recording screens, you
can view information about the project,
make monitor settings, assign markers
within a project, and specify the playback
speed.
INFO tab
This shows the project name, sampling rate,
le format, and project creation date and
time.
MON tab
Here you can make monitor settings for
playback and recording (p. 63).
Touch the <LEVEL> icon to access the
OUTPUT SETUP screen.
MARK tab
• During playback
You can assign a marker within the
project (p. 64). Touch <SET> to assign a
marker at the current location.
Use JUMP
to move to the preceding
marker, or to move to the next
marker.
• During recording
You can assign a marker within the
project (p. 49). Touch <SET> to assign a
marker at the current location.
If you touch <SPLIT> during recording,
the recording will be divided, creating a
new project starting at that point.
A-B SPEED tab (only during
playback)
Here you can repeatedly play a specied
region within the project (p. 65), or change
the playback speed (p. 66).