Roland R-26 - Repeatedly Playing a Portion of a Project

Playback
65
Overview Getting Ready Recording Playback File Operation Computer Appendix
Repeatedly Playing a
Portion of a Project
The AB Repeat function lets you repeatedly
play a specied portion of a project. You
can use this to repeatedly hear a section of
interest.
1. In the main screen, touch the A-B
SPEED tab.
2. Press [ ] button to play the
project.
3. Specify the beginning of the repeat
(point A).
During playback, touch < > That
point will be the beginning (point A) of the
repeated portion.
4. Specify the end of the repeat (point
B).
During playback, touch < >. That
point will be the end (point B) of the
repeated portion, and repeat playback
between A-B will begin.
Cancelling the setting
If point A and point B are already specied,
touching <OFF> will clear the point A and
B settings.
To stop playback, press the [
] button. The
repeat playback settings (points A and B)
will be retained, but playback will stop.
MEMO
• If you’ve set point A and do not set
point B before playback reaches the
end of the project, playback will repeat
between point A and the end of the
project.
• The repeat settings will be cancelled
if you use [
]/[ ] buttons to select
another project.