Replacing Consumable Parts
3
Maintenance
76
Close the front cover.
Press .
Close the right cover.
Open the right cover.
Preparations are complete when this screen appears.
Open the front cover.
Replace the second felt wiper.
The replacement procedure is the same as for the rst felt wiper. Refer to the illustration shown in step
.
3.
Exit the felt wiper replacement menu.
Close the front cover.
Press .
Close the right cover.
After the process to exit the felt wiper replacement menu is performed,
the screen shown in the gure appears.
Press , then to go back to the original screen.
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
P. 40, "Printing Tests and Normal Cleaning"
CLOSE COVER R
Click!
OPEN COVER R
CLOSE COVER R
MAINTENANCE
REPLACE FELT
To Next Page
Loading...
