Roland SPD-SX - Selecting a Kit

Performing
Performing
21
Selecting a Kit
Now, try selecting a kit (p. 5) and playing it.
1. Press the [KIT] button to access the top screen.
2. Use the [-] [+] buttons to select a kit.
3. Try selecting various kits and playing them.
MEMO
• By holding down the [SHIFT] button and using the cursor [
] [ ] buttons, you can select kits in steps of 10.
• You can move rapidly through the kits by holding down the [-] button and pressing the [+] button, or by holding down the
[+] button and pressing the [-] button.
• You can register the order in which you want to switch kits This is called a path Chain (p. 56).
• You can freely customize a kit by assigning the sounds you like to the pads, and by applying eects (p. 42).
• You can also switch kits by playing a pad or pressing a footswitch (p. 57).
Information shown in the top screen
Performance tempo
Kit name
Kit number
Level meter
Kit eect (p. 46) on/o status
Pad volume
adjustment (p. 26)
Kit eect on/o
(p. 23)
Performance tempo
setting (p. 25)
: FX1 is on
: FX1 is o