Roland SPD-SX - Exchanging Pads (PAD EXCHANGE); Initializing a Kit or Pad; Initializing a Kit (KIT INIT); Initializing a Pad (PAD INIT)

Customizing a Kit
Customizing a Kit
49
Exchanging Pads (PAD EXCHANGE)
This operation exchanges the settings of two pads. You can also exchange pads between dierent kits.
1. In the KIT screen (or the top screen, etc.), choose QUICK MENU PAD EXCHANGE.
The PAD EXCHANGE screen will appear.
2. Play the rst pad.
The screen will indicate the selected pad, and the pad’s indicator will blink.
If you want to exchange pads with a dierent kit, select the other kit.
3. Play the other pad that you want to exchange.
The pads will be exchanged.
Initializing a Kit or Pad
Here’s how to initialize the settings of a kit or pad.
Initializing a Kit (KIT INIT)
This will initialize the settings of the currently selected kit (all parameters in KIT, KIT PAD, and KIT EFFECT).
* The kit settings will be lost when you execute KIT INIT. If you want to keep the settings, save them to a USB ash drive
before you continue (p. 66).
1. Select the kit that you want to initialize (p. 21).
2. In the KIT screen (or the FX screen), choose QUICK MENU KIT INIT.
3. Press the [ENTER] button.
A conrmation message will appear.
If you decide to cancel the operation, press the [EXIT] button.
4. Press the [ENTER] button once again.
The kit will be initialized.
Initializing a Pad (PAD INIT)
This will initialize the settings of the pad (all parameters in KIT PAD).
* The pad settings will be lost when you execute PAD INIT. If you want to keep the settings, save them to a USB ash drive
before you continue (p. 66).
1. In the KIT screen (or the KIT PAD screen), choose QUICK MENU KIT PAD INIT.
2. Play the pad that you want to initialize.
3. Press the [ENTER] button.
A conrmation message will appear.
If you decide to cancel the operation, press the [EXIT] button.
4. Press the [ENTER] button once again.
The pad will be initialized.