Roland SPD-SX - Customizing a Kit; Settings for the Entire Kit (KIT); Adjusting the Kit Volume and Tempo (COMMON)

42
Customizing a Kit
Here’s how to customize a kit. For each pad, you can assign the desired wave and specify how it will sound.
Settings for the Entire Kit (KIT)
Here you can make overall settings for the entire kit, such as volume and output. For the procedure, refer to “Basic Editing
Procedure” (p. 16).
1. Choose MENU KIT.
2. Edit the parameters.
KIT screen quick menu
In the KIT screen, pressing the [QUICK] button will display the following quick menu.
Menu Explanation Page
KIT NAME Edits the kit name. p. 47
KIT COPY Copies a kit. p. 48
KIT PASTE Pastes a kit. p. 48
KIT INIT Initializes a kit. p. 49
MULTI VIEW Lists the settings of the selected parameter for all pads. -
PAD LOCK Turn PAD LOCK on/o. p. 63
SET ALL PAD Copies a parameter setting to all pads. p. 47
PAD COPY Copies a pad. p. 48
PAD PASTE Pastes a pad. p. 48
PAD EXCHANGE Exchanges pads. p. 49
PAD INIT Initializes a pad. p. 49
TEMPO MATCH Sets the kit tempo as a tempo value calculated from the length of the wave. p. 43
* For some pages of the KIT screen, some of the quick menu items are not shown.
Adjusting the Kit Volume and Tempo (COMMON)
Here you can adjust the overall volume and tempo of the entire kit.
Parameter Value Explanation
KIT VOLUME 0–100 Adjusts the volume of the entire kit.
KIT TEMPO 20.0–260.0 Species the tempo of the kit.
PAD LINK
OFF, PAD1–PAD9,
TRIG1–4, FS1, FS2
Sounds two pads simultaneously.
Playing either of the specied pads will sound both pads simultaneously.