Roland SPD-SX - Copying;Pasting Kits or Pads; Copying;Pasting a Kit; Copying;Pasting a Pad

Customizing a Kit
48
Copying/Pasting Kits or Pads
Here’s how to copy the settings of a kit or pad.
Copying/Pasting a Kit
Here’s how to copy the settings of the currently selected kit, allowing you to paste them to a dierent kit.
1. Select the copy-source kit (p. 21).
2. In the KIT screen (or the top screen, etc.), choose QUICK MENU KIT COPY.
3. Press the [ENTER] button.
The kit will be copied.
4. Select the copy-destination kit (p. 21).
5. In the KIT screen (or the top screen, etc.), choose QUICK MENU KIT PASTE.
6. Press the [ENTER] button.
A conrmation message will appear.
If you decide not to execute, press the [EXIT] button.
7. Press the [ENTER] button once again.
The kit will be pasted.
Copying/Pasting a Pad
This operation copies the settings of the last-struck pad, allowing you to paste them to a dierent pad. You can also paste to a
dierent kit.
1. In the KIT screen (or the top screen, etc.), choose QUICK MENU PAD COPY.
The indicator of the copy-source pad will blink. You can also change this by playing a pad.
2. Press the [ENTER] button.
The pad will be copied.
3. Play a pad to select the copy-destination pad.
If you want to paste to a dierent kit, select the paste-destination kit.
4. In the KIT screen (or the top screen, etc), choose QUICK MENU PAD PASTE.
The indicator of the copy-destination pad will blink. You can also change this by playing a pad.
5. Press the [ENTER] button.
The pad will be pasted.