EasyManuals Logo

Roland TD-12 User Manual

Roland TD-12
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
Chapter 2
[INST]
Chapter 2. Drum Instrument Settings [INST]
Here’s how to select and edit sounds, such as the snare drum
and kick drum.
There are two basic ways to select the sound you want to edit.
1.
Press [INST].
[INST] lights, and the “INST” screen appears.
fig.02-001_70
2.
Strike a pad.
The settings screen for the struck pad appears.
To select a pad’s rim, strike the rim.
1.
Press [INST].
[INST] lights, and the “INST” screen appears.
2.
Hold down [SHIFT] and press [CURSOR (left/
right)] to select the trigger input number.
The trigger input number is indicated in the upper part of
the screen.
3.
Press [RIM] to select the head or rim.
Head: [RIM] is unlit.
Rim: [RIM] is lit.
fig.02-002_70
When MIDI Note Number (p. 38) corresponding to a pad
is received, the pad is selected and shown in the screen.
When editing instruments, you can prevent the screen from
being switched inadvertently even if you hit another pad.
1.
Select the pad to be locked.
The settings screen for the pad appears.
2.
Hold down [SHIFT] and press [RIM] to make it
flash.
The pad is locked and other pads cannot be selected.
3.
To release the lock, hold down [SHIFT] and
press [RIM] to make it stop flashing.
* You can change the pad to be locked by using buttons even if
the [RIM] is flashing.
All the TD-12 sounds are referred to as instruments (
INST
).
fig.02-001_70
1.
Press [INST].
[INST] lights, and the “INST” screen appears.
“Group”:
Type of instrument (Inst Group)
“Inst”:
Name of instrument (Inst Name)
2.
Strike a pad.
The settings screen for the struck pad appears.
3.
Press [CURSOR (up/down)] to move the cursor
to “Group” or “Inst.”
4.
Use [+/-] or [VALUE] to select the Inst group/
instrument.
5.
Press [EXIT] to return to the “DRUM KIT”
screen.
Pressing [F5 (H & R)], you can choose to set the head and
rim simultaneously or individually. When you select the
head and rim simultaneously, the rim’s instrument
number is one bigger than head.
Choosing a Pad to Edit
Choose by Hitting a Pad
Choose with the Buttons
Lock the Pad You are Editing
(TRIG LOCK) [SHIFT] + [RIM]
Assign an Instrument to a
Pad
TD-12_e.book 33 ページ 2007年8月8日 水曜日 午後1時20分

Table of Contents

Other manuals for Roland TD-12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland TD-12 and is the answer not in the manual?

Roland TD-12 Specifications

General IconGeneral
Instruments560
Kits50 Preset, 50 User
MIDIIn, Out, Thru
EffectsEQ
Trigger Inputs12
Power SupplyAC Adaptor
PadsCompatible with Roland V-Drums pads

Related product manuals