Roland TD-12 - Multi-Effects Parameters

43
Chapter 4. Effect Settings
Chapter 4
[EFFECTS]
DELAY
Adds the delay sound.
PANNING DELAY
This is a delay effect with echoes that pan left and right.
FLANGER
Produces a metallic resonance that rises and falls somewhat
like a jet airplane taking off or landing.
PHASER
Adds a phase-shifted sound to the original sound, producing
a swirling modulation.
CHORUS
Gives richness and spaciousness to the sound.
Multi-Effects Parameters
Parameter Value Description
Time 0–1600 (ms) Time until the delay
sound is heard
Feedback -98–98 (%) Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
Parameter Value Description
TimeL 0–1600 (ms) Time until the delay
sound is heard
TimeR
Level L 0–127 Volume level of the de-
lay sound
Level R
Feedback -98–98 (%) Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
Parameter
Value Description
Delay
0–15.0 (ms) Tone of the flanger
LFO Rate 1–128 Frequency of modulation
Depth 0–127 Depth of modulation
Feedback -98–98 (%) Amount of the flanger
sound that is fed back into
the effect (minus: inverts
the phase)
Phase 0–180 Spatial spread of the
sound
Parameter Value Description
Freq 100–8000 (Hz) Basic frequency at which
the sound will be modu-
lated
LFO Rate 1–128 Frequency of modulation
Depth 0–127 Depth of modulation
Resonance 0–127 Amount of feedback
Parameter Value Description
Delay 8.0–30.0 (ms) Tone of the chorus
LFO Rate 1–128 Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 Spatial spread of the
sound
TD-12_e.book 43 ページ ２００７年８月８日 水曜日 午後１時２０分