Roland TD-12 - Output Routing and Pad Switch Functions

76
Chapter 9. Settings for the Entire TD-12 [SETUP]
Here you can select the output destination for each TRIGGER
INPUTs, sequencer parts, and the sound input from the MIX
IN jack.
1. Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
2. Press [F2 (OUTPUT)] - [F1 (PAD)].
The “OUTPUT ASSIGN (PAD)” screen appears.
fig.09-OutAsgn1_70
3. Press [CURSOR (left/right)] to select the
TRIGGER INPUT.
You can also select by striking the pad.
4. Use [+/-] or [VALUE] to select the output
destination.
* You can restore all output destinations to factory settings
(MASTR L+R) by pressing [F5 (DEFAULT)] - [F5
(EXECUTE)].
1. Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
2. Press [F2 (OUTPUT)] - [F2 (OTHER)].
The “OUTPUT ASSIGN (OTHER)” screen appears.
fig.09-OutAsgn2_70
3. Press [CURSOR (left/right)] to select the
source.
AMB: Ambience
MFX: Multi-effects
BACK: Backing parts of the sequencer
PERC: Percussion part of the sequencer
CLICK: Metronome click
MIXIN: Sound input from the MIX IN jack
4. Use [+/-] or [VALUE] to select the output
destination.
* You can restore all output destinations to factory settings
(MASTR L+R and PHONES) by pressing [F5 (DEFAULT)] -
[F5 (EXECUTE)].
Block Diagram (p. 100)
Pads connected to TRIGGER INPUT 12 (AUX2) and/or 11
(AUX1) can be set to switch drum kits and play back patterns.
1. Connect the pad(s) to the TRIGGER INPUT 12
(AUX2) and/or 11 (AUX1).
2. Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
3. Press [F3 (CONTROL)] - [F1 (PAD SW)].
The “PAD SWITCH” screen appears.
fig.09-PadSw_70
4. Use [+/-] or [VALUE] to select the function.
5. When setting to “USER,” press [CURSOR] to
move the cursor to “AUX1” and “AUX2.”
6. Use [+/-] or [VALUE] to select the functions for
the heads and rims of AUX1 and AUX2.
Selecting Output Destinations
[F2 (OUTPUT)]
Output Destination for the Drum
Instruments
Output Destination for the Sequencer
Parts/Metronome Click/Sound Input
from MIX IN [F2 (OTHER)]
Setting the Switches
[F3 (CONTROL)]
Using Pads as Switches
[F1 (PAD SW)]
Function AUX1 AUX2
Head Rim Head Rim
OFF
OFF OFF
KIT SELECT1 OFF KIT#
INC
KIT#
DEC
KIT SELECT2 KIT# DEC KIT# INC
CHAIN SELECT1 OFF CHAIN
# INC
CHAIN
# DEC
CHAIN SELECT2 CHAIN# DEC CHAIN# INC
PATTERN
SELECT1
OFF PTN#
INC
PTN#
DEC
PATTERN
SELECT2
PTN# DEC PTN# INC
TD-12_e.book 76 ページ ２００７年８月８日 水曜日 午後１時２０分