Roland TrueVIS VG2-640 - Returning All Settings to Factory Defaults

Returning All Sengs to Factory Defaults
This menu returns all sengs to the same as their factory defaults.
The sengs for [MENU LANGUAGE], [LENGTH UNIT], and [TEMP. UNIT] are not returned to their factory default
values.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
SUB MENU
FACTORY DEFAULT
4. Press [ENTER] to execute the operaon.
Managing the Basic Settings of the Printer
3. Optimizing Operation Management 215