Roland TrueVIS VG2-640 - Setup of Sheet Media

Setup of Sheet Media
Load the sheet media on the printer. When you have nished loading the media, [SETUP] lights. This work is refer-
red to as "Setup of Media."
1. Determine the posions of the media (sheet media).
Procedure
1. Open the front cover.
2. Move the media clamps to the outside of the grit rollers on the le and right edges respecvely.
3. Loosen the retaining screws of the media holders, and then draw them to the le and right ends respecvely.
4. Pass the leading edge of the media between the pinch rollers ( ) and the grit rollers ( ).
Setup of Media
40 2. Basic Operations