Roland TrueVIS VG2-640 - Printing;Cutting Area; Maximum Area

Maximum Area
The prinng or cung area along the horizontal plane (the direcon in which the carriages move) is determined
by the posion of the pinch rollers.
A
B
C
D
E
F
A
B
C
Pinch roller
Prinng or cung area
Prinng or cung coordinates origin (0,0)
A 75 mm (3 in.)
B 10 mm (0.4 in.)
C 1.5 mm (0.06 in.)
D Max. 24,998 mm (984.2 in.)
E 64-inch model: Max. 1,600 mm (63 in.) (54-inch model) Max. 1,346 mm (53 in.)
F 105 mm (4.13 in.)
Printing/Cutting Area
314 2. Main Specifications