Roland TrueVIS VG2-640 - Pausing and Canceling Output

Prevenng Sedimentaon in Inks
The precipitaon of the ingredients in the ink disables prinng in normal color. So that the ink mixes well, shake
the pouch tray horizontally with a stroke length of around 5 cm (2 in.) from each end of the tray.
• Remove just the pouch tray for the white ink, shake the pouch tray 50 mes (about 20 seconds), and then
reinsert this pouch tray.
• The pouch trays for colors other than white do not need to be shaken before every operaon, but be sure to
shake them when installing new ones.
The ingredients in white ink tend to sele. Each day, before starng the day's operaons, be sure to carry out the
above steps. Allowing the ink to stand without carrying out these steps can cause the seled material to harden,
resulng in malfuncon or other problems.
IMPORTANT
• Do not remove the ink pouches. Shake the enre pouch tray. Removing the ink pouches may lead to the ink leaking.
• Before shaking, wipe o any ink from around the mouth of the ink pouch. If you do not wipe o the ink, it may splaer when
you shake the pouch tray.
• When you have nished mixing the ink, reinsert the pouch tray immediately. Taking me to reaach the ink cartridge will ad-
versely aect the ink path.
• Even if you rarely use white ink, shake the pouch tray for the white ink 50 mes (about 20 seconds) once a week.
Checking before Output
2. Basic Operations 51