• Nozzle is clogged -> Proceed to Procedure 5
• Nozzle is not clogged -> Click [Close] to finish
5. Select [Medium Cleaning] and click [Go].
Medium cleaning starts.
6. To check for nozzle clogging again.
If the nozzle condition is not fixed by [Medium Cleaning], perform [Powerful Cleaning].
MEMO
If after several times of Powerful Cleaning, nozzle clogging is still found, perform [Manual Cleaning].
RELATED LINKS
・ P. 70 "Manual Cleaning"
Periodical Cleaning Maintenance
Regular Maintenance 69
To Next Page
Loading...
