Umbauanleitung/retrofit instruction 125 MAX Series
Loosen the Allen screws M6 (Pos. 1,2,3 in Fig. 12) in the indicated order according to Fig.
12.
Caution: During the disassembly fuel may spill out.
Remove fuel pump with support.
Fig. 12 (K00313)
Loosen the residual Allen screws M6 (Pos. 4, 5 in Fig. 12) and remove carburetor flange.
2
4
5
Seite/page 38/59
Ausgabe/Edition 09/2014
To Next Page
Loading...
