Rotax 125 Max - Removal of Cylinder Components; 1) Dismantle Cylinder Head Cover; 2) Combustion Chamber Insert

Umbauanleitung/retrofit instruction 125 MAX Series
4.4) REMOVAL OF CYLINDER COMPONENTS
4.4.1) Dismantle cylinder head cover
 Loosen 4 Allen screws M6 crosswise from the cylinder head cover.
 Remove the cylinder head cover.
 Caution: Seal may stick to the cylinder head cover.
Fig. 19 (K00320)
4.4.2) Combustion chamber insert
 Loosen 5 hex. screws (SW13) crosswise from the combustion chamber insert.
Fig. 20 (K00324)
1
3
2
4
Seite/page 42/59 Ausgabe/Edition 09/2014