rotork IQT User Manual

85
If your Rotork actuator has been
correctly installed and sealed, it will give
years of trouble-free service.
Should you require technical assistance
or spares, Rotork guarantees the best
service in the world. Contact your local
Rotork representative or the factory
direct at the address on the nameplate,
quoting the actuator type and serial
number.
A full listing of our worldwide sales
and service network is available on our
website at www.rotork.com
UK head office
Rotork Controls Limited
Brassmill Lane
Bath
BA1 3JQ
tel +44 (0)1225 733200
fax +44 (0)1225 333467
email mail@rotork.com
USA head office
Rotork Controls Inc
675 Mile Crossing Blvd
Rochester
NY 14624
tel +1 (585) 247 2304
fax +1 (585) 247 2308
email info@rotork.com
Local representative:
Rotork Sales and Service

rotork IQT Specifications

General

Quarter-turn	Yes
Housing Material	Aluminum alloy
Torque Range	10 Nm to 3000 Nm
Multi-turn	Yes
Linear	Yes
Ingress Protection	IP68
Communication Protocols	Modbus, Profibus, Foundation Fieldbus
Operating Temperature	+70°C
Local Controls	local pushbuttons
Control Modes	Modulating
Display	LCD
Type	Intelligent Electric Actuator