ROUSH 422011 - Assemble Airbox Tray and MAF Tube

2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION C – SUBASSEMBLY
1316-RHD-AA 12152016 52 800.59.ROUSH
3. Place the MAF tube assembly (1315-12B579HC)
through the opening of the airbox tray from the
inside.
4. Align the holes on the MAF tube assembly with
the J-clips on the airbox tray. Install two (2)
bolts (W500224) (M8 X 25) from Hardware Kit A
(1315-TVSHKA) and torque to 10 Nm (10 mm
socket).
5. Install the  lter (1315-9601R) onto the MAF tube
and secure it with the supplied clamp. Torque
clamp to 3-5 Nm.
6. Remove the MAF sensor from the factory airbox
lid. Retain the bolts for reuse.