Ruckus Wireless ZoneFlex 7731 - Page 73

65
Configuring the Wireless Bridge
Configuring Wireless System Settings
3. The Channel setting allows you to define a specific channel for bridge communi-
cation, or set to SmartSelect (default) to let the bridge automatically choose the
optimal channel.
4. In Country Code, set your current location (if available). If you are located in the
United States, this option is not available.
CAUTION: Selecting the incorrect country or region may result in violation of appli-
cable laws. If you purchased the bridge in the United States, you do not need to
manually set the country code. Ruckus Wireless APs that are sold in the US are
preconfigured with the correct country code and this setting cannot be changed.
5. In SSID, type a new name for the wireless link or leave as is to accept the default
name.
6. Click Update Settings to save and apply your changes.
Encryption Method By default, ZoneFlex 7731 units are shipped with WPA2
encryption enabled.
For more information, see either “Using WEP”
on page 73
or “Using WPA” on page 75.
Wireless Bridge Mode Used to manually designate the unit as the Root or Non-
Root bridge. See “Role Reversal”
on page 77.
Export Configuration Only available from the Root Bridge Web interface. Use
this link to save a Root Bridge configuration file to an admin
computer. This configuration file can then be used to
configure Non-Root Bridges with matching settings.
Table 12. Wireless configuration options