83
5
Managing the Wireless Bridge
Managing Firmware Upgrades
You can use the Web interface to check for software updates/upgrades for the
firmware built into the bridge. You can then apply these updates to the device in one
of two ways: (1) manual updating on an as-needed basis or (2) automating a regularly
scheduled update.
Before starting, decide which option you want to take:
■ Automate a regularly scheduled update.
■ Run a one-time manual update right now.
By default, the automatic upgrade option is disabled.
To get started with upgrading the firmware, go to Maintenance > Upgrade. When
the Maintenance :: Upgrade options appear, decide which upgrade method to use.
The following sections describe each of the upgrade options listed on the Upgrade
page.
In This Chapter
Managing Firmware Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Changing the Administrative Login Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Enabling Other Management Access Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Enabling Logging and Sending Event Logs to a Syslog Server . . . . . . . . . . . . . . . . . . . . . 94
Sending a Copy of the Log File to Ruckus Wireless Support . . . . . . . . . . . . . . . . . . . . . . . 95
Rebooting the Wireless Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Resetting the Wireless Bridge to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Running Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
To Next Page
Loading...
