58
Navigating the Web Interface
Monitoring the Wireless Bridge Status
Monitoring the Peer Device
While logged in to the Web interface of a given bridge unit, you can access informa-
tion on a peer device to monitor statistics from the peer device’s perspective (you can
access information on a Non-Root bridge from the Root Bridge interface, for
example).
To view peer device information
1. Locate the peer device in the Connected Devices section of the Status > Wireless
page.
2. Click the link under MAC Address. A new page entitled Status :: Wireless :: Station
Details appears, showing the current status and statistics of an associated wireless
device.
Primary DNS Server The IP address of the primary DNS server.
Secondary DNS Server The IP address of the secondary DNS server
NTP Server The IP address of the network time protocol (NTP)
server.
Network Status Indicates the status of the Ethernet interface.
IP Setting Indicates the IP address assignment method (Static
or DHCP).
MAC Address The MAC address of the Internet interface.
IP Address The IP address currently assigned to the device.
Subnet Mask The subnet mask currently assigned to the device.
DHCP Actions Click Renew DHCP to request an IP address from a
DHCP server. Click Release DHCP to release this IP
address back to the DHCP server.
Management VLAN Indicates whether management VLAN is enabled or
disabled, and displays the VLAN ID, if enabled.
Table 8. Status > Bridge information
To Next Page
Loading...
