Need help?Do you have a question about the Rutter VDR-100G2 and is the answer not in the manual?
Overview of the VDR-100G2 system architecture and its main components.
Detailed descriptions of DPU, DAU, Audio, Video, NMEA, OAU, FRM/SFRM, RSM, and Interfaces.
Using a PC for downloading and replaying VDR data.
Diagrams illustrating the VDR system configuration and connections.
Details on the system's power consumption under various operating conditions.
Technical details for the Data Processing Unit (DPU) and Data Acquisition Unit (DAU).
Specifications for Final Recording Medium, Operation/Alarm Unit, microphones, and RSM.
Procedures for securing and viewing recorded data sets on the OAU.
Instructions for saving data to the Remote Storage Module (RSM).
Muting alarms, dimming display, and accessing test screen via OAU.
List and explanation of alarm codes displayed on the OAU.
Minimum specifications for a client PC used for VDR data download and playback.
Steps for installing software and performing data downloads from the VDR.
Using USB Memory Sticks and Remote Storage Modules for data retrieval.
Initiating data copy from VDR to RSM or USB Memory Stick via OAU.
Correct procedure for disconnecting the Remote Storage Module (RSM).
Connecting the RSM to a client PC for data retrieval via USB.
Steps to install the VDR playback software on a client PC.
Launching the application, using configuration files, and setting passwords.
Selecting data sets and unarchiving extracted data for playback.
Detailed explanation of playback controls, audio, conning, AIS, doors, logs, alarms, and data extraction.
Overview of VDR/SVDR maintenance requirements and procedures.
Regular checks, inspections, and verification of VDR/SVDR data and components.
Troubleshooting system errors, alarm codes, NMEA, and log errors.
Procedure for documenting maintenance activities in the service log.
To Next Page
General