VDR-100G2/G2S Operation User Manual 25
RUT-UM-02-002_Rev. 2.0
3.7 Alarm Code Description
Listed below are the alarm codes that may appear on the OAU LCD display:
Alarm Code Description
System Error Communication with the Record Application has been lost
Video Error Communication with the Video Module has been lost
Audio Error Communication with the Audio Module has been lost
FRM Error Communication with the Final Recording Medium has been lost
Power Fail Loss of utility power
PCM Error Communication has been lost with the Power Control Module
Remote Error Communication has been lost with the Remote Storage Module
Serial Error Communication has been lost with the NMEA Module
Mic Error Communication has been lost with one of the microphones
Disk Error Failure to secure a data set
GPS Error Failure to record GPS data
Table 3.1 – Alarm Code Description
Pressing the “Mute” button acknowledges the alarm code and silences the alarm.
To Next Page
Loading...