VDR-100G2/G2S Operation User Manual 58
RUT-UM-02-002_Rev. 2.0
7 Maintenance
7.1 Introduction
The Rutter VDR/SVDR requires regular maintenance to ensure its continued seaworthiness and
serviceability. The procedures outlined in this chapter will help the operator to identify any problems that
may be caused during the maintenance or repair of the VDR/SVDR or of any sensors connected to it.
In accordance with IEC 61996, the operator must follow theses steps to verify the integrity
(correctness) of the data being recorded by the VDR/SVDR whenever any one of the following
conditions occur:
• When the ship’s VDR/SVDR is due for an annual performance test;
OR
• Whenever maintenance or repair is carried out on the VDR/SVDR and all peripheral
devices;
OR
• Whenever maintenance or repair is carried out on any of the connected sensors from which
the VDR/SVDR collects data such as the Radar, GPS, AIS transceiver, etc; OR
• Every three months.
To Next Page
Loading...