Installation - TT-3020C
Installation - TT-3020CInstallation - TT-3020C
Installation - TT-3020C Functional description
Functional descriptionFunctional description
Functional description
Page
PagePage
Page 2-6
2-62-6
2-6 25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00
The Login indicator will be on when the Transceiver is logged
into an ocean area. If the Transceiver is in synchronisation but
hasn't been logged into an ocean area the indicator will flash. If
the Transceiver is unable to get synchronisation the indicator will
be off. Please notice that the TT-3020C during power-up will at-
tempt to auto-login to a preferred ocean region if currently
logged out of the network.
The Send indicator will be flashing when the Transceiver enters
the Transmit protocol. When the Transceiver is transmitting the
indicator will be on. When the transmission is completed the in-
dicator will flash until an acknowledgement is received from the
Land Earth Station (LES) .
The Mail indicator will flash if the Transceiver is receiving a
Non-EGC message. When the message has been received the in-
dicator will be on. The indicator will be on until the message has
been read. If the Capsat program is used the message will be
read immediately by Capsat. Because of this the user will see the
Mail indicator flash when a message is being received and then
turns off when the message is received.
The Distress button is used to send Distress Alerts. Pressing the
Distress button will make the equipment beep and the Distress
LED flash. If the button is pressed for at least 5 seconds and the
Distress LED becomes steady the equipment will send a Distress
Alert. The Distress Alert, with current position of the ship, will be
sent to the land station used for your latest transmissions except
when another destination is specified in the Distress Generator.
After you have sent a maritime Distress Alert, you may then send
a detailed distress message, please see software operators guide.
The Distress indicator.
..
. When a Distress Alert has been sent the
Distress LED will be constantly on. The Distress indicator can be
switched off when an acknowledgement is received from the LES
by pressing the Stop button.
Document Nr: I-MA-3010.68-5510-762-IVT-312
To Next Page
