Built-in GPS (optional)
Built-in GPS (optional)Built-in GPS (optional)
Built-in GPS (optional) Installation - TT-3020C
Installation - TT-3020CInstallation - TT-3020C
Installation - TT-3020C
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 2-17
2-172-17
2-17
2.5.5 Grounding
RF-grounding of an Integrated Capsat System requires special
attention. Each unit shall have its own individual low-inductance
earth connection. The use of a common bus bar for grounding is
not recommended as this can lead to unwanted common-mode
coupling effects. The ground should be connected to the cabinets
metal frame to provide a return path for fault currents due to
equipment malfunction or external faults such as lightning. Inter-
connecting cables must be well screened.
2.6 Built-in GPS (optional)
GPS means Global Positioning System.
The GPS module is installed from the factory and you need not to
perform any installation to use it.
If you have ordered your Capsat Transceiver without a built-in
GPS and you later need to install a GPS module, then you should
contact your dealer to obtain instructions on how to accomplish
this.
Document Nr: I-MA-3010.68-5510-762-IVT-312
To Next Page
Loading...
