Power requirements
Power requirementsPower requirements
Power requirements System Installation
System InstallationSystem Installation
System Installation
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 3-1
3-13-1
3-1
3 System Installation
This chapter provides specific information enabling you to install
the TT-3020C Maritime Capsat system with a minimal effort. The
default, or factory configuration is described, together with pro-
cedures for altering this configuration.
The TT-3000C Integrated Capsat system consists of the following
components:
TT-3020C Inmarsat-C Maritime Transceiver with GPS
option.
TT-3001B Opt. 001 Maritime Antenna Unit or
TT-3005A Maritime Antenna Unit. or
TT-3005M Maritime Antenna Unit
TT-3606E Message Terminal
TT-3601E Keyboard
TT-3680B Power Supply
TT-3608A Hard Copy Printer or
TT-3042D Local Printer
TT-3042C (optional) Remote Alarm Distress Box
TT-3042D (optional) Remote Alarm Distress Box with Printer
TT-3608G (optional) Remote Printer Unit
3.1 Power requirements
A TT-3000C Integrated Capsat System operates on either 115
VAC, 220 VAC or a 24 V floating DC (nominal value), with an ab-
solute minimum of 15 V DC at the input terminal of the TT-3680B
AC/DC converter. The TT-3680B provides automatic switch over
to the DC supply in case a drop out occurs on the mains.
The total power consumption varies with the particular system in
question. As a guide-line, please note the power consumption of
the following equipment:
Document Nr: I-MA-3010.68-5510-762-IVT-312
To Next Page
