TT-3608A Hard Copy Printer
TT-3608A Hard Copy PrinterTT-3608A Hard Copy Printer
TT-3608A Hard Copy Printer System Installation
System InstallationSystem Installation
System Installation
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 3-33
3-333-33
3-33
be turned on. When the printer is set off-line or powered off the
audio alarm and the FAULT LED in any Remote Alarm/Distress
Box will be turned off. If the "Printer almost out of paper" condi-
tion has not been fixed when the printer is set online again the
fault indication will reappear. If the STOP button is pressed while
FAULT LED/relay is turned on the FAULT LED/relay will be turned
off but the FAULT LED/relay will be turned on again soon after if
the fault condition has not been fixed
The DIP switch 8 “ROLL PAPER STAND” in the printer, must be set
to OFF, which selects roll paper stand, and the roll paper stand
connector must be attached to the back of the printer before the
advanced paper low option is enabled. The DIP switch can be ac-
cessed by removing the switch cover from the back of the printer.
Document Nr: I-MA-3010.68-5510-762-IVT-312
To Next Page
Loading...
