SAJ 8000B series - Installation; Wiring

-
02
-
8000B Series
Installation
WARNING
Install the frequency inverter on nonflammable material like metal.
Otherwise it may cause a fire.
WARNING
Make sure that the mounting environment away from metal dust. Otherwise
it may cause damage to the frequency inverter.
CAUTION
When mount over two inverters in the same cabinet or enclosure, install a
fan or other cooling device to keep the temperature inside below 50
℃
.
Do not let the conductor head or screws fall into the inside of the inverter.
Otherwise it may cause damage to the inverter.
Wiring
WARNING
Ensure only qualified personnel to operate. Otherwise it can cause an
electrical shock.
Make sure the inverter is isolated from power supply by the circuit breaker.
Otherwise it may cause a fire.
Verify that the power supply is turned OFF before start wiring. Otherwise it
may cause an electrical shock or fire.
Make sure that the ground terminal is grounded correctly. Otherwise it may
cause an electrical shock.