SAJ 8000B series User Manual

-
03
-
8000B Series
CAUTION
Never connect the AC power supply to output terminals U, V and W.
Otherwise the inverter will be damaged and the guarantee is invalid.
Make sure that wiring conform to EMC requirements and local power safe
standard. Make sure to use right wire according to this instruction manual.
Otherwise it may cause an accident.
Braking resistor or braking unit cannot be directly connected to DC bus
terminals (P+) and (N-). Otherwise it may cause a fire.
Before Turn on the AC Power Supply
WARNING
Make sure that the voltage of inverter conforms to the local power supply
voltage. Verify that the wiring of input and output is correct and there is no
short-circuit in peripheral circuit. Tighten the terminal screws. Otherwise
these may cause damage to the inverter.
Turn on the input AC power only after the front cover is put correctly.
Otherwise it may cause an electrical shock.
CAUTION
Never perform a hi-pot or withstand voltage test of the inverter. Otherwise
it may cause damage to the inverter.
Make sure that the optional parts are connected correctly. Otherwise it
may cause damage to the inverter.

SAJ 8000B series Specifications

General

Brand	SAJ
Model	8000B series
Category	Inverter
Language	English