Sam4s ER-285M - Manual Weight Entry; PC Online Mode

SAM4s ER-285M Operator's and Program Manual v1.4 Operator Reference Guide • 105
Manual Weight Entry
Operators can make manual weight entries if the item has been programmed to accept them.
You must use the decimal key to enter fractional manual weights.
1. Place an item on the scale.
2. Enter the weight using the decimal key
for fractional weights. Press the SCALE
key:
1 . 5 SCALE
3. Enter the price per pound on the key pad.
Do not use the decimal key. For
example, for $3.00, enter:
3 0 0
4. Press a PLU key. For example, press
PLU 1:
1
DATE 01/10/2007 WED TIME 08:33
1.50 LB MANUAL WT. @ @3.00
PLU1 $4.50
TAX1 $0.27
TOTAL $4.77
CASH $4.77
CLERK 1 NO.000011 00001
PC Online Mode
You can use the ER-280 Series PC utility to program your register at a PC or to poll reports
from you register. There are no special commands to ready the register for communication.
The register must be:
• outside of a sale,
• a clerk must be signed on, and
• the RS-232C port must be set for PC communication. See “RS-232 Communication
Options” on page 115.